More and more customers are paying great attentions to oil sludge treating. It’s good to know that environment protection is brought by many countries, and more companies are willing to take the responsibility to help the earth keep green.
GN Solids Control last month provided another 2 sets of oil sludge treating systems to overseas customers. In the past several years, GN Solids Control also manufactured several sets of oil sludge treating systems and shipped to USA, Kuwait, Qatar etc.
GN Oil Sludge Treating Systems are customized to suit customers’ treating demand better,they are more suitable to treat oil sludge from refinery plant, oil tank bottom as well as oil cuttings from drilling rig sites. Now GN Solids Control provides 1m3/h to 15m3/h standard treating systems. These 2 systems are GN 5 m3/h system.
Here are the main components in GN Oil Sludge Treating Systems:
1.GN Feeding Pump
GN made vacuum pump is especially designed to suck high density and large viscosity drill cuttings. It can move oil sludge effectively by an air compressor. Max. Suction distance is 8m and max. Discharge distance is 1000m.
2.GN Shale Shaker
As the pre-treating equipment, GN shale shaker eliminate larger solids in the oil sludge before feeding into GN 2 phase decanter centrifuge. A high pressure spraying line is fixed with multiple flushing outlets to clean the shaker screen panel.
3.GN 2 Phase Decanter Centrifuge
GN Solids Control has different models of centrifuges, in the 5m3/h oil sludge treating system a 14 inch bowl centrifuge is used. 2 Chemical tanks are used to provide flocculation and demulsification fluid chemicals.
4.GN 3 Phase Disc-Centrifuge
GN 3 phase disc-centrifuge is used to treat the fluids discharged from GN 2 phase decanter centrifuge. After treated by GN 3 phase centrifuge, oil in the recovered water is around 500~1000 ppm and recover oil BS&W is less than 3%.
5.GN Mud Tank
All treating equipment are fixed on GN mud tank. Hot water pipes are fixed along with the tank to provide a better dilution result.