GN Sludge Vacuum Pumps are widely used in transfer solids, liquid and sludge. It’s one pneumatic pump that only needs air compressor to provide air source, not electricity needed. GN sludge vacuum pump can be used in harsh environment, such as sludge has solids content over 80% can be transferred.
Now GN Solids Control manufactures 3 types, treating capacity is 40m3/h, 20m3/h and 10m3/h. Max discharge distance is from 500m to 1000m and max suction distance is 50m. GN Solids Control exhibited several types of vacuum pumps in the past CIPPE, thousands of visitors showed great interests on GN sludge pump. Most of GN sludge pumps are transferring the following material: drilling waste slurry or waste solids discharged from solids control treating equipment such as shale shaker, mud cleaner and decanter centrifuge; drill waste in mud pit; drill sludge in oil tank bottom; hazardous waste; bulk tank and silo tank slurry; animal waste etc.
Just take the largest GN sludge pump 40m3/h as an example, it works in automatic mode and manual mode. The pump can be used to suck any heavy slurry as well as dry slurry like stones and sands. Due to the special structure design, there are no mechanical moving components in the pump so it can be used for longer time without any weariness.
GN Sludge Pump can transfer solids less than 75 mm. There are two types of sludge pump: one is skid mounted and the other is trailer mounted.
GN Solids Control will exhibit vacuum sludge pump in the 2018 OTC show. We’d like to invite all customers visit GN booth. GN Solids has 2 booths: one is in NRG Center, booth no. 1369 and the other is in NRG Arena, booth no. 8000.
Besides the sludge vacuum pump, GN Solids Control will also exhibit some other solids control equipment like shale shaker, decanter centrifuge and centrifugal pump.