• Twitter
  • Facebook
  • Google+
  • LinkedIn
  • YouTube


Contact Us

GN Solids America LLC

Tel:+1 (713) 377-2984

Tel:+1 (713) 518-2368

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Add:6710 Windfern Road, Houston, TX 77040,USA


To support the market better and quicker, GN Solids invest more in the product production, have large stock in centrifuges, shakers, mud hoppers, mud agiators, pump etc. Welcome to contact GN Solids Control if you have urgent needs.   GN half stock centrifuges: The most popular model centrifuge is 14inch centrifuge GNLW363CG or GNLW363CG-VFD. The centrifuge is equivalent to Swaco 518 high speed centrifuge or Derrick DE1000 high speed centrifuges. For now, we only have half stock centrifuge- GNLW3

GN solids control produce both vacuum degasser and centrifugal type degasser for oil & gas drilling solids control system. Vacuum vessel type degasser is the traditional vacuum degasser in China, it is self-contained type and no need an extra jetting pump like Derrick. The working principal is as below: The vacuum pump create negative pressure in the horizontal type vacuum tank, so it can suck the mud from the mud tank under the vacuum degasser, then the mud spray to the tank wall through surro

decanter centrifuge
At the very beginning when GN Solids Control was established and firstly enter the solids control industry, as other solids control manufacturers, GN Solids Control started from the comparably easier equipment like shale shakers and mud cleaners. But what is different from others, GN Solids Control always focuses on the most advanced technology. As long as we do it, we do it to the best. So, soon after its establishment, decanter centrifuge became GN’s core product. Decanter centrifuge is quite d

GN Booth in ADIPEC 2016, in Abu Dhabi
One year is always fast, and the yearly festival of oil and gas industry is coming within 2 months. It is one of the three largest oil shows in the world, the ADIPEC. The other two main oil and gas exhibitions are respectively the CIPPE which is held in March in Beijing, the capital of China, and the other is OTC which is held in every May in Houston, Texas, USA. GN Solids Control attended all of the 3 oil shows. In CIPPE and OTC, you can see all the main equipment GN provides, including the solids

Vertical cuttings dryer
GN vertical cuttings dryer, as the effective equipment to reduce the oil on cuttings, can work instead of TDU if the local environment policy allow 5% OOC standard. But normally speaking, vertical cuttings dryer is installed at rigsite to recycle the valuable drilling fluids and let it back to active mud system for drilling, and TDU is final treatment of oil based cuttings with lot of harmful chemicals to the land. After treatment of TDU, the OOC can be controlled within 1%, and the ashes can be make

Contact Us

Fields marked with ( * ) are required.


Contact us

By submitting this form, you accept our privacy policy.


  or   Create an account

Forgot your password? |  Forgot your username?


WS Register

  or   Login

Subscribe to Our Newsletter