- Tel: +1-713-377-2984 Tel: +1-713-779-3017 Tel:+1-713-320-2103
- Email: usa@gnsolidscontrol.com
Products
Contact Us
GN Solids America LLC
Tel:+1 (713) 377-2984
Tel:+1 (713) 518-2368
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Add:6710 Windfern Road, Houston, TX 77040,USA
Desilter
-
Description
Desilter is the third stage solids control and fourth stage drilling mud cleaning equipment in the drilling fluids recycling system. GN Desilter commonly adapts 4” cyclone which could separate the solid phase particles with size of 15-25 microns. GN Desilter is designed 2 options of with and without underflow screen for customers’ requirement.
The desilter with underflow shaker is also called Mini cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size desander and desilter assembly, the Mini Desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and Mining project, Mini desilter cleaner is an Ideal choice.
Desilter Options for different Application
Desilter Types Desilter Discription Type Desilter without downstream drying shale shaker Model GNZJW-12NJ / GNZJW-16NJ Application For oil gas drilling un-weighted drilling mud Features Small footprint, economic choice, no consumable screens Result Wet cuttings, not recommended for Weighted mud and drying solids Type Desilter with GNZS752 Series Mini Shale Shaker Screen Area 1.4㎡ Model GNZJ752K-M12NK Application For oil gas drilling small drilling rig , CBM drilling, HDD, Water Well drilling Features Small footprint, economic choice, acceptable drying solids GN Desilter Features:
- The entire shaker deck undergoes heat treatment to relieve welding stress, enabling it to withstand high G force.
- The shaker screen is installed with a mechanical ratchet wrench gear for quick tightening, facilitating easy disassembly and ensuring long-lasting durability.
- The wedge blocks for tightening the screen mesh are made of nylon, providing high temperature resistance, corrosion resistance, and wear resistance.
- Vibration motor: Italian OLI brand.
- Polyurethane material is used for sealing between the shale shaker and screen, ensuring a long service life and easy replacement.
- The supporting rubber strips for the bottom frame of the vibration screen are made of stainless steel, offering strong corrosion resistance and a long service life.
- The electrical control box is made of aluminum alloy/stainless steel explosion-proof material, ensuring good sealing and strong corrosion resistance.
- The pre-tensioned shaker screen allows for convenient and quick disassembly and replacement.
Mud Desilter for Drilling Mud Separation System:
Desilter is placed after desander but before Decanter Centrifuge. Desilter is also one type equipment to remove the solid particle in drilling through centrifugal force. Desander could remove the much fine solids than desander. During HDD and CBM mud system, the drilling mud after treated by desilter is clean enough for reuse. While in oil & gas drilling, there the mud still needs to be treated by a Decanter Centrifuge.
GN Solids America, your reliable supplier for drilling mud Desilter.
Desilter Parameter
Model GNZJ752K-M12NK GNZJW-12NJ GNZJW-16NJ Treating Capacity 240m3/h(1056GPM) ≤240m3/h(1056GPM) ≤360m3/h(1584GPM) Desilter Cone 4 inch x 12 each 4 inch x 12 each 4 inch x 16 each Feeding Size 6 inch 6 inch 6 inch Output Size 8 inch 8 inch 8 inch Working Pressure 0.25~0.4MPa 0.25~0.4Mpa 0.25~0.4Mpa Bottom Shale
Shaker SpecsBottom shaker model DLS752K N/A N/A Vibration Mode Linear Motion Vibration Motor 2×1.5kW Screen area 1.35m2 Deck Angle Range +2° Adjust G Force ≤7.5G Weight 1406Kg 450Kg 469Kg L×W×H(mm) 2124×1697×1803 2068×980×1520 2068×980×1520 The above specification and parameters for reference only. - YOUR CONTENT CODE FOR REVIEWS/COMMENTS GOES HERE
- YOUR CONTENT CODE FOR RELATED PRODUCTS GOES HERE