GN Solids Control is a professional solids and liquid separation products manufacturer. Every year, GN Solids Control manufactures thousands of customized mud/ slurry treating systems. At the beginning of October, GN Solids Control provides one set HDD mud treating system to Sinopec.
It’s well known that GN Solids Control manufactures many standard models such as 200GPM, 500GPM and 1000GPM. GN Solids Control also provides tailored systems based on customers’ demands.
In this GN HDD mud treating system, it consists of the following products:
1. GN Shale Shaker
A GN shale shaker GNZS703 is used to eliminate those large solids/particles occurred during HDD drilling. 703 shaker is fixed with 3 pieces shaker screens.
2. GN Mud Cleaner
GN mud cleaner GNZJ703F-1S8N is a 3 in 1 product: 1 set 703 shaker, 1 set 10inch desander cyclone and 8 sets 4inch desilter cyclones. Usually, solids larger than 25 microns can be separated out by using GN mud cleaner.
2 sets GN centrifugal pumps are also fixed along the tank to suck the recycled mud and feed into 10inch cyclone and 4inch cyclone separately.
3. GN Decanter Centrifuge
Here GN Solids Control provides one 14inch size bowl centrifuge GNLW363C-VFD. All the main parameters can be adjusted by using the VFD HMI. Centrifuge bearing temperature and vibration are be also monitored by GN VFD box.
GN Solids Control has different models of centrifuges. The largest model is 30inch bowl. We provided 2 sets to one Australian mining contractor months ago.
4. GN Screw Conveyor
After treated by GN decanter centrifuge, finer solids larger than 2~ 5 microns are separated out and transferred by GN screw conveyor.
5. GN Mud Tank
All those mentioned GN equipment above is fixed on GN mud tank. GN Solids Control provides one shaker tank to hold the shaker and desilter, whole provides one centrifuge water storage tank after treated.